Products by Brand: Ebara

Ebara 2CDX

Ebara 2CDX

The 2CDX series are a twin impeller pump made almost entirely in 304 stainless steel. These pumps are suitable for a variety of applications where higher pressures are required.

 

Document download
Ebara 3LS2

Ebara 3LS2

The 3LS series are a 2-Pole speed close coupled stainless steel pump, featuring one piece, plasma stamped volute casing. The smooth stamped stainless steel surfaces result in superior quality and high efficiency.

The back pull-out construction permits the disassembly and overhaul of the impeller, shaft and bearings, without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.

Document download
Ebara 3LS4

Ebara 3LS4

The 3LS4 series are a 4-Pole speed close coupled stainless steel pump, featuring one piece, plasma stamped volute casing. The smooth stamped stainless steel surfaces result in superior quality and high efficiency.

The back pull-out construction permits the disassembly and overhaul of the impeller, shaft and bearings, without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.

Document download
Ebara 3LS4-65/80

Ebara 3LS4-65/80

The 3LS(4)-65/80 series are are full caste 316 Stainless Steel pump ends.  They have as standard Silicon vs Silicon Viton mechanical seals. The back pull-out construction permits the disassembly and overhaul of the impeller, shaft and bearings, without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.

 

Document download
Ebara Best One Sump Pump

Ebara Best One Sump Pump

Sump pump with Vortex impeller, 20mm solids handling capacity, full 304 stainless steel construction, fitted with mechanical seal and auto float switch and 5 metres of cable

Document download
Ebara CDX

Ebara CDX

The CDX series are a single impeller pump, made almost entirely in 304 stainless steel. These pumps also feature the one piece volute manufactured using Ebara's unique plasma stamping process

Document download
Ebara DML

Ebara DML

Submersible sewage pumps with single channel non-clog impellers and double row lower bearings for reliability. Suitable for raw sewage, waste water and storm water. 2.2 to 22 kW (3ph) Manual only

 

Document download
Ebara DMV

Ebara DMV

Submersible pumps with non-clog vortex impellers and double row lower bearings for reliability. Suitable for waste water containing soft solids, raw sewage, and storm water

Document download
Ebara DVS

Ebara DVS

A robust cast iron pump, with solids handling semi-vortex impeller, ideal for Waste water applications with soft or fibrous material such as Wash down sumps or Septic effluent. Motor sizes from 0.4 to 0.75 kW (1ph) Manual or Auto, or 0.75 to 3.7 kW (3ph) Manual or Auto.

 

Document download
Ebara DW VOX

Ebara DW VOX

The submersible sump pumps are manufactured in 304 stainless steel, with a double mechanical seal. They have a vortex impeller, suitable for dirty water applications with some solids and/or fibres. They can be used are used for pumping of drainage and industrial waste water, 0.55 to 1.1 kW (1ph) Manual or Auto and 0.55 to 1.5 kW (3ph) Manual only

Document download
Ebara DWO

Ebara DWO

Open Impeller Pumps For pumping water containing suspended soft solids. Use in various industrial processes 1.1 to 1.5 kW (1ph) or 1.1 to 3.0 kW (3ph)

 

Document download
Ebara EVMG

Ebara EVMG

The Ebara EVMG vertical multistage pumps feature technically advanced designs, and use IEC standard motors, and inbuilt thrust bearing for models over 1.5 Kw. Stainless steel components are of high quality, and the unique bulge forming process produces rugged construction with increased wall thickness and assures component integrity. Ebara's robust construction extends to critical internal components such as the impellers and intermediate casings. With other features including self-aligning liner rings, square edged spline shaft, and tungsten carbide lower bearings, the result is a product of exceptional quality and reliability.

 

Document download
© 2018 Industrial Pumping Pty Ltd