Products by Brand: Mono

Mono AGM

Mono AGM

The Mono AGM Long haul range incorporates a heavy duty industrial bearing housing to withstand the higher flows and pressures available in the range. Available as a bareshaft for your own drive or a fully assembled motorised unit with electric, diesel or petrol drive to suit your head and capacity needs.

Features & Benefits

  • Flows from 170 to 840 lpm
  • Heads up to 300 m 
  • Electronic, diesel or petrol drives
  • Stainless steel rotating pump parts
  • Hard chrome plated rotor
  • Hot dipped galvanised baseplates
  • Low maintenance
Document download
Mono ASP

Mono ASP

The Mono Agricultural Surface Pump (ASP) is a water transfer pump and has been designed to pump potable water from rivers, dams, ponds or tanks to a desired location. The ASP has been design tested and proven in the field over a wide range of water pumping applications. It has been designed for maximum efficiency and reliability. There are two main configurations in the ASP Range; the Motorotor or Bareshaft.

Features & Benefits

  • Sand and silt tolerant
  • Easy priming
  • Long delivery
  • Consistent Flow vs Head
  • Shallow wells
  • Available in Petrol, Diesel and Electric
Document download
Mono Compact C

Mono Compact C

The Compact C Range of progressing cavity pumps has been manufactured by Mono to offer you a pump designed to fit into compact spaces, whilst reliably performing to the maximum duty requirements of your application. Features include good suction lift capability of over 8 metres, positive displacement for process control and variable speed for accurate dosing.

Features & Benefits

  • Available in cast iron or stainless steel, with a choice of rotor and stator materials
  • High pressure, long haul pumping, eliminating the need for a series of pumps when pumping over long distances or with high head requirements
  • Gentle pumping action minimises shear and crush damage
  • Inspection cover available for applications where rag content is a problem
  • Low running speeds - ideal for abrasive applications
  • An inspection cover available for applications where rag content is a problem
  • The pump can be supplied with a square inlet and conveyor to assist viscous slurries into the pumping element

 

Mono CP

Mono CP

Mono CP pumps are designed for use where low flow or transfer duties in both domestic and industrial applications are required; these units are self-priming and achieve suction lifts up to 8 metres on water. Mono’s CP Range pumps provide an economic answer to many pumping duties. Simple design and construction provide extended pump life with minimal routine servicing.

Features & Benefits

The progressing cavity pump principle ensures steady output pressure and non-pulsing flow with minimal slippage - a very useful feature when pumping heating oil to burner nozzles. The smooth action and resilient rubber stator ensure quiet running - ideal for light industrial and domestic installations. Simple design and easily dismantled, featuring an abrasion and chemical resistant stator for handling viscous liquids and random solids

Applications include:

  • Diesel and fuel oil transfer
  • Septic tank and cesspit emptying
  • Water supply from wells or rivers
  • Transferring light industrial products.
Document download
Mono Dosing

Mono Dosing

The Mono range of dosing pumps offers an efficient, reliable and low maintenance solution for applications where low flow, accurate dosing is required. The Mono dosing pump provides a smooth pumping action with no pulsation and very low shear. The pump is ideal for either intermittent or continuous dosing duties in high pressure, low flow applications, and represents a cost-effective and reliable alternative to the more expensive gear pumps traditionally used for these types of duties. The modular design of the new dosing pump allows the four models in the range to cover performance requirements from 25 litres per hour up to 1,250 litres per hour and 72 bar pressure.

 

Features & Benefits

  • Self-priming with a gentle non pulsating action to help maintain product integrity
  • New coupling rod design offers higher pressure capabilities, up to 72 bar / 1044 psi
  • Most pump components, except body/coupling rod/suction chamber are stainless steel
  • The suction chamber is manufactured in high density polyethylene
  • The end cover and mechanical seal housing is PVDF
  • For severe chemical environments, internal pump components are supplied in Hastelloy
  • Resilient stator - flexible in operation and high resistance to wear - available in a variety of materials, allowing a wide range of products to be pumped
Document download
Mono Solar SRX

Mono Solar SRX

The Mono™ Sun-Ray SRX solar pump has been designed to transfer surface water with the same efficiency and reliability as other Mono solar pumps. Available, with either a stationary or GPS Tracking array, ranging from 200 Watts to 1600 Watts, the Sun-Ray can deliver very high daily flows with discharge pressures of 120m. The highly efficient, helical rotor pump is inherently self-priming, so the pump can be positioned up to 4m above the water source, allowing the pump to be installed on the top of dam walls or on river-banks above the high water mark. The Sun-Ray is suitable for pumping water from springs, rivers, tanks and dams. It is available with a floating pontoon that has been designed to safely enable the pump to float on a dam or other water source. The PC (Progressive Cavity) helical rotor pump element used in the Sun-Ray pump is proven to provide maximum water output even in water containing silt or iron oxide, and low pump speed means extended rotor and stator life in abrasive bores. The PC pump will deliver water with every rotation regardless of speed, on solar, when pump speed will vary with the amount of sun it is important to get water with every turn of the pump. All Sun-Ray systems are supplied complete with pre-wired solar modules, array frames, pump element, submersible motor and solar motor controller. The entire package is easy to assemble and all electrical connections are fitted with plugs & sockets, so electrical connections do not require an electrician. Float and/or pressure switch input enables complete system automation. The Sun-Ray will only pump as long as water is needed and will stop once tanks and troughs are full.

 

Features & Benefits

  • Solar power - no fuel costs, maximum output in sunny conditions
  • Self-contained - no need to connect AC power or transport fuel
  • Simple design, proven technology
  • Supplied as a complete package - easy to install
  • Helical rotor pump - highly efficient, self-priming
  • The rate at which water is pumped can be limited to suit the water source

 

Document download
© 2018 Industrial Pumping Pty Ltd