Products by Brand: Southern Cross

Southern Cross CBI

Southern Cross CBI

 

Designed for general transfer of all abrasive and solids free water and liquids in domestic or light industrial applications.

FEATURES

  • Compact design
  • 2 sizes in 2 to 6 stages
  • All parts in contact with liquid are 304 stainless steel
  • 10mm (3/8”) priming and drain plugs
  • Screwed pump suction and discharge connections
  • CBI-2 25mm (1”BSPF)
  • CBI-4 32mm (11/4” BSPF) x 25mm (1” BSPF)
  • High quality mechanical shaft seal
  • TEFC motor, 2800rpm, 240V single phase or 415V three phase, IP54 enclosure
Document download
Southern Cross CBI WPS

Southern Cross CBI WPS

APPLICATIONS

Designed for automatic water pressure boosting in domestic applications and light industry.

FEATURES

  • PRESSCONTROL systems for excellent pressure and flow control without a pressure tank
  • Pressure Tank Systems with 8 and 18 litre tanks
  • All 304 stainless steel pump construction
  • Brass suction line check valve supplied
  • Pressure to 550kPa (80psi)
  • Output to 130 litres per minute for up to 11 tap supply
  • Simple installation — 25mm male connections
  • Capacity Maximum - 130 l/min
  • Max. Pressure - 550 kPa (80psi)
  • Liquid Temp - +4°C to +40°C
Document download
Southern Cross ISO PRO

Southern Cross ISO PRO

APPLICATIONS

Designed for heavy duty industrial use, including belt drive applications, for general water transfer in processing plants, mines, construction sites and irrigation.

FEATURES

  • Heavy duty oil lubricated taper roller bearings
  • Australian designed and manufactured
  • Heads to 160 metres
  • Up to 250 litres per second discharge
  • Manufactured to ISO 5199 Standard
  • Heavy duty design type 316 shaft
  • High strength cast iron bearing housing
  • Mechanical seals fitted as standard with single on-shaft mechanical seal
  • 1600kPa pressure rating
  • Taper mounted impeller for positive drive and easy removal
  • Replaceable stainless steel or zinc free bronze wear rings
  • Reusable ‘O’ ring body seals in Viton as standard and Teflon or EPDM as options
  • AS2129 Flanges
  • Standard tappings —Volute drain plug, suction flange tapping for suction gauge and discharge flange tapping for pressure gauge

OPTIONAL WET END MATERIAL OPTIONS

  • Cast Iron
  • Stainless Steel
  • Zinc Free Bronze
  • SG Iron

 

Document download
Southern Cross ISO Sovereign

Southern Cross ISO Sovereign

APPLICATIONS

Designed for efficient and reliable general purpose water transfer in industry, building services and irrigation.

FEATURES

  • Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance.
  • Australian designed and manufactured
  • 32 to 200mm discharge
  • Up to 250 litres per second discharge
  • Heads to 160 metres.
  • Taper mounted and keyed impeller for easy removal from shaft
  • Heavy duty shaft with large capacity impeller end bearing for safe operation at high speed
  • Hydraulically and dynamically balanced impellers
  • Type 431 stainless steel shaft
  • Rugged cast iron volute with integral suction and discharge flanges and mounting feet
  • Pressure rated to 1600kPa (160 metres head)
  • Cast iron impeller and backplate
  • Stainless steel impeller nut
  • Maximum pumped liquid temperature for “ISO Sovereign” Pumps is 80°C using standard seals
  • Lip type shaft seals to protect bearings
  • Single mechanical seal
Document download
Southern Cross ISO Starline Motorpump

Southern Cross ISO Starline Motorpump

APPLICATIONS

Designed for efficient and reliable general-purpose water transfer in industry, building services and irrigation.

FEATURES

  • Space saving design
  • Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance
  • Australian designed and manufactured
  • Up to 250 litres per second discharge
  • ISO 9001 quality assured
  • 32 to 200mm discharge
  • Heads to 160 metres
  • se of standard off-the-shelf foot and flanged electric motors
  • Taper mounted and keyed impeller for easy removal from shaft
  • Heavy duty stainless steel shaft extensions for safe operation at high speed
  • Type 316 stainless steel shaft extension
  • S.G. cast iron motor shaft clamp
  • TEFC IP55 motor; rugged cast iron volute with integral suction and discharge flanges
  • Pressure rate 1600kPa (160 metre head)
  • Cast iron impeller and backplate; stainless steel impeller nut
  • Rigid cast iron bell housing connects motor and pump housing
  • Single mechanical seal.
  • Maximum pumped liquid temperature for ‘Star-Line’ Motorpumps is 100°C using standard seals. 
  • Liquids up to 140°C can be handled using special seals

 

Document download
Southern Cross LA Line Shaft Turbines

Southern Cross LA Line Shaft Turbines

Southern Cross "LA" Line Shaft Turbine Pumps provide the quality, durability and reliability for vital community water supplies, large rural irrigation schemes, turf watering installations and stock watering plants which source water from underground supplies.

FEATURES

  • High pumping efficiency for reduced running costs
  • Highest quality phosphor bronze and stainless steel construction for corrosion resistance
  • Suitable for installation in boreholes from as small as 140mm inside diameter, these pumps deliver up to 50 litres per second. Heads up to 200 metres
  • Shaft driven from surface mounted vertical shaft electric motor or PTO driven right angle gear drive head
  • Use standard flanged solid shaft electric motor mounted on heavy duty thrust bearing assembly with non-reverse ratchet and flexible shaft coupling
  • Impeller trimming allows exact matching of pump duty points to maximise efficiency and minimise power costs
  • Australian made for guaranteed spare parts availability
Document download
Southern Cross NA Submersibles

Southern Cross NA Submersibles

Southern Cross "NA" Electric Submersible Borehole Pumps are Australian made and designed for high capacity borehole pumping applications. The feature quality phosphor bronze and stainless steel construction for corrosion resistance. Suitable for installation in boreholes from 150mm ID upwards. Motor sizes from 2.2 to 90 kW and deliver up to 55 litres per second with heads up to 300 metres. Rigid connection between motor and pump provides a single, perfectly aligned unit and impeller trimming allows exact matching of pump duty points to maximise efficiency and minimise power costs. Suitable also for industrial applications including dewatering of mines and excavations, sump drainage and in-line pressure boosting. Can operate anywhere from vertical to horizontal where there is sufficient water to fully immerse the unit.

 

Document download
Southern Cross SC 4 inch

Southern Cross SC 4 inch

Full 304 Stainless Steel submersible pump for boreholes 100mm or larger.

FEATURES

  • Exceptional quality and hydraulic design
  • 304 stainless steel pump bowls, impellers and diffusers for optimum wear and corrosion resistance
  • Heavy duty 304 stainless steel pump shaft and motor coupling
  • Heavy duty  304 stainless steel pump outlets screwed 1 ¼, 1 1/2 and 2 inch
  • Capacities to 300 litres/minute
  • Heads to 300m
Document download
Southern Cross SC 6, 8 and 10 inch

Southern Cross SC 6, 8 and 10 inch

Full 304 Stainless Steel submersible pumps, suitable for borehole pumping, mine and sump dewatering and in-line pressure boosting.

FEATURES

  • Exceptional quality and hydraulic design
  • Precision stamped and cast stainless steel construction
  • Sturdy and lightweight
  • Capacities to 160m3/hour
  • Pumping heads to 500m
  • Can operate at any angle from vertical to horizontal
  • Replaceable NBR shaft bearings and impeller neck rings

150MM 6”

  • Maximum unit diameter 152mm
  • Capacities to 78m3/hour and heads to 420m
  • Available as 2 to 40 stage pumps with motors from 1.1 to 37kW
  • Pump outlets screwed 2 ½, 3 or 4 inch BSP

200MM 8” AND 250MM 10”

  • Maximum unit diameter 240mm
  • Capacities to 160m3/hour and heads to 500m
  • Available as single to 20 stage pumps with motors from 5.5 to 185kW
  • Pump outlets screwed 5 or 6inch BSP
Document download
Southern Cross SD 4 inch

Southern Cross SD 4 inch

Fully submersible 4" pumps for all general water supply from boreholes 100mm or larger

FEATURES

  • Exceptional quality and hydraulic design
  • 304 stainless steel pump bowls
  • High grade noryl floating stack impellers & lexal diffusers for wear and corrosion resistance
  • 304 stainless steel pump shaft and motor coupling
  • Cast 304 stainless steel pump outlets screwed 1 ¼ and 2 inch
  • Capacities to 400 litres/minute
  • Heads to 300m
Document download
Southern Cross SU

Southern Cross SU

The Southern Cross SU models are high head, heavy duty self-priming pumps which feature a high efficiency 6 vane open impeller and an easy to maintain design which makes them ideal for the transfer of dirty water. Available in a wide range of materials, these pumps provide excellent pumping performance in a wide variety of applications across a large range of duties.

FEATURES:

  • Back pull out design
  • Maintenance hatch allows easy access to pump casing and impeller to remove blockages.
  • 6 vane high efficiency open impeller allows passage of solids up to 32mm.
  • External shim less adjustment of the impeller.
  • 316 stainless steel mechanical shaft seal with titanium/tungsten carbide faces.
  • Wide range of pump construction materials available. 

APPLICATIONS

  • Waste Water
  • Dewatering
  • Processing
  • Raw Water
  • Irrigation
  • Mining
  • Agriculture

TECHNICAL DATA

  • Models 3 - 6 inch
  • Capacity  2.8-85 m3/hr
  • Max Head 62 metres
  • Max. Self-Priming 7.6 m
  • Max. Solid Size 21-32mm
Document download
Southern Cross SX1000-V

Southern Cross SX1000-V

The SX1000-V Air Operated High Volume Vacuum Pump is a high velocity, heavy duty solids pump, capable of capturing high density slurries via a strong 25"Hg vacuum combined with high velocity airflows. The SX1000-V can handle solids up to 80% of the hose diameter connected and will transfer up to 50 m3/hr, depending on the materials and distances involved. The SX1000-V High Volume Solids Pump has no moving parts in contact with the material being pumped and can pass rags, bolts and many other items that would render a standard impeller pump, inoperable.

FEATURES:

  • 100% compressed air operation
  • Intrinsically safe (ATEX Compliant)
  • Fully portable
  • No moving parts in contact with product
  • Manual or fully automatic operation
  • High vacuum and very high airflow
  • Delivers over 1000 metres
  • High solids content (80%+) transfer

APPLICATIONS:

  • Spillage recovery and transfer
  • Large dam desilting
  • Sump cleaning and desilting
  • Tank bottoms and sludge extraction
  • Palm oil pond desludging
  • OBM transfer and pit cleaning
  • Bentonite, sand, and cement powders transfer

TECHNICAL DATA

  • Height 215 cm
  • Width 180 cm
  • Length 200 cm
  • Weight 880 kg
  • Air consumption 600 - 900cfm at 85psi+
  • 25"Hg+ (85kPa) vacuum
  • Suction inlet 100 mm (4") or 150 mm (6")
  • Discharge outlet 100 mm (4") or 150 mm (6")
  • Handles solids to 75 mm (3")
Document download
Southern Cross SX40

Southern Cross SX40

The SX40 is an air driven, composite material, compact, lightweight, intrinsically safe, and multipurpose solids pump. 

APPLICATIONS

  • Sump cleaning
  • Transfer of mining slurries and slimes
  • Drain desilting
  • Effluent transfer
  • Hazardous waste transfer
  • Pneumatic excavation
  • Agricultural product and waste transfer

FEATURES 

  • Composite fibreglass construction
  • 100% compressed air operation
  • Intrinsically safe
  • Fully automatic
  • Versatile
  • No internal moving components
  • High vacuum and high airflow
  • Recovers material, (suction) from up to 40 metres
  • Delivers up to 300 metres
  • Pumps up to 7 m3/hr 

TECHNICAL DATA

  • Height 87 cm
  • Width 67 cm
  • Length 135 cmWeight <36 kg
  • Air consumption 60cfm at 100psi+
  • Up to 25”Hg+ (85kPa) vacuumSuction 75 mm
  • Discharge 75 mm
Document download
Southern Cross SX60

Southern Cross SX60

The SX60 Portable Air Operated Slurry Pump was designed to offer a one man vacuum recovery, pressure discharge unit that can recover and transfer almost any flowable material. The SX60 Portable Slurry Pump is 100% air powered and operated and creates over 24"hg+ of vacuum using 150 cfm at 85psi+.

THE SX60 PORTABLE SLURRY PUMP FEATURES:

  • Fully automatic operation
  • Recovers material (suction) from up to 50 metres
  • Delivers up to 500 metres (1500 feet)
  • Pumps up to 10m3/hour
  • Intrinsically safe
  • Highly mobile
  • No internal components

TECHNICAL INFORMATION:

  • Height 80cm
  • Width 70cm
  • Length 150cm
  • Weight 198 kgs
  • Air consumption 150cfm at 85psi+
  • Suction 75mm
  • Discharge 75mm
  • Handles solids to 50mm
Document download
Southern Cross SXSS

Southern Cross SXSS

The Southern Cross SXS Slurry Pumps are electro submersible centrifugal pumps designed for pumping abrasive and high density slurries in mining, heavy industry, civil construction and municipal applications.

FEATURES

  • 27% chrome white iron impeller, integral agitator, volute and replaceable back plate.
  • 420 stainless steel strainer, shaft and shaft sleeves.
  • Low speed electro submersible motor provides reliable continuous operation.
  • Heavy duty cast iron motor construction.
  • Motor incorporates moisture sensors, float switch and bearing and stator temperature sensors.
  • Oil bath lubricated double mechanical seal

TECHNICAL DATA

  • Pump Outlet: 80mm to 400mm
  • Capacity: 6.5 – 670 litres per second
  • Head: up to 64m
  • Maximum solid size: 10 - 60 mm
  • Speed: 980 - 1480 RPM
  • Motor size: 7.5 – 315kW

 

Document download
© 2018 Industrial Pumping Pty Ltd