Products by Type: Solar

Franklin Solar

Franklin Solar

The Franklin SubDrive SolarPAK is the System Solution to your solar pumping requirements. No other system delivers the features, benefits, and reliability of SubDrive SolarPAK in just one package. The SubDrive Solar pumping system is fully compatible with the remote monitoring and access parameters of the Observant system to allow the site owners/operators full access to their Franklin Electric solar water pumping system.

  • High flow system for faster tank fill and significant water output
  • Proven motor and pump technology and reliability
  • Robust IP55, NEMA 3 drive enclosure minimizes impact of wildlife, insects, dust, and weather
  • DC and AC power inputs with auto-switching to generator back-up
  • Seven segment controller display shows real-time input watts and system status
  • Remote telemetry capability through a RS-485 continuous data port
  • MPPT – Max Power Point Tracking for maximizing efficiency of input power
  • Soft start feature prevents water hammer and increases system life
  • Simple installation and no required maintenance
  • Built-in diagnostics and protection
Document download
Grundfos Solar SQFlex

Grundfos Solar SQFlex

SOLAR SQFlex is a sustainable, reliable and cost-efficient water supply solution for remote locations. The complete SQFlex pump range consists of 10 different pump sizes: 4 helical rotor pumps for medium to high heads and low to medium flows, and 6 centrifugal pumps for shallow heads and high flows. It is available in AISI 316 stainless steel for slightly aggressive water. The pump is fitted with a high efficiency motor for DC or AC voltage. This makes pump sizing and selection extremely easy.

Being designed for continuous as well as intermittent operation, the SQFlex system is especially suitable for water supply applications in remote locations, such as:

  • Villages, schools, hospitals.
  • Farms – watering of cattle
  • Watering applications
  • Conservation areas
  • Floating pump installations for pumping of water from ponds and lakes.

Features and benefits

  • Dry-running protection with automatic restart prevents pump damage to the pump
  • Stainless steel pump casing for long service life
  • Carbon Ceramic bearings ensure high reliability
  • MPPT ensures even and high system efficiency regardless of power source
  • Two way communication between the control unit and the pump
Document download
Mono Solar SRX

Mono Solar SRX

The Mono™ Sun-Ray SRX solar pump has been designed to transfer surface water with the same efficiency and reliability as other Mono solar pumps. Available, with either a stationary or GPS Tracking array, ranging from 200 Watts to 1600 Watts, the Sun-Ray can deliver very high daily flows with discharge pressures of 120m. The highly efficient, helical rotor pump is inherently self-priming, so the pump can be positioned up to 4m above the water source, allowing the pump to be installed on the top of dam walls or on river-banks above the high water mark. The Sun-Ray is suitable for pumping water from springs, rivers, tanks and dams. It is available with a floating pontoon that has been designed to safely enable the pump to float on a dam or other water source. The PC (Progressive Cavity) helical rotor pump element used in the Sun-Ray pump is proven to provide maximum water output even in water containing silt or iron oxide, and low pump speed means extended rotor and stator life in abrasive bores. The PC pump will deliver water with every rotation regardless of speed, on solar, when pump speed will vary with the amount of sun it is important to get water with every turn of the pump. All Sun-Ray systems are supplied complete with pre-wired solar modules, array frames, pump element, submersible motor and solar motor controller. The entire package is easy to assemble and all electrical connections are fitted with plugs & sockets, so electrical connections do not require an electrician. Float and/or pressure switch input enables complete system automation. The Sun-Ray will only pump as long as water is needed and will stop once tanks and troughs are full.

 

Features & Benefits

  • Solar power - no fuel costs, maximum output in sunny conditions
  • Self-contained - no need to connect AC power or transport fuel
  • Simple design, proven technology
  • Supplied as a complete package - easy to install
  • Helical rotor pump - highly efficient, self-priming
  • The rate at which water is pumped can be limited to suit the water source

 

Document download
© 2021 Industrial Pumping Pty Ltd