Products by Type: Wasterwater Submersible

Davey High Flow Submersible

Davey High Flow Submersible

General purpose dewatering sump pumps for water transfer or removal, Able to pump grey water of neutral pH containing up to 10% small soft solids or 1% fine solids. Models from 0.37kW 240 volts to 6” 7.5kW 415 volt pumps.

Document download
Davey High Head Submersible

Davey High Head Submersible

This range of submersible pumps is designed for pumping drinking water with a neutral pH. The lubricating oil used in the pump is vegetable based and non-toxic. Operated by an automatic float attached to the pump, it detects when water is available. The D42A/B and D53A/B are available to purchase as a standalone unit but can be configured as pressure systems for toilet flushing and laundry use.

Document download
Davey Single Channel Submersible

Davey Single Channel Submersible

Able to pump semi-screened or grey water of neutral pH containing up to 20% small soft solids or 1% fine solids. Some accelerated wear should be expected when pumping hard solids in suspension.

Document download
Davey Submersible Vortex Sump Pump

Davey Submersible Vortex Sump Pump

Semi-vortex open impeller sump pump design that is less susceptible to blockage. Suitable for pumping light slurries with soft solids in suspension - grey water, sump emptying, septic effluent disposal and water transfer.

 

Document download
Ebara Best One Sump Pump

Ebara Best One Sump Pump

Sump pump with Vortex impeller, 20mm solids handling capacity, full 304 stainless steel construction, fitted with mechanical seal and auto float switch and 5 metres of cable

Document download
Ebara DML

Ebara DML

Submersible sewage pumps with single channel non-clog impellers and double row lower bearings for reliability. Suitable for raw sewage, waste water and storm water. 2.2 to 22 kW (3ph) Manual only

 

Document download
Ebara DVS

Ebara DVS

A robust cast iron pump, with solids handling semi-vortex impeller, ideal for Waste water applications with soft or fibrous material such as Wash down sumps or Septic effluent. Motor sizes from 0.4 to 0.75 kW (1ph) Manual or Auto, or 0.75 to 3.7 kW (3ph) Manual or Auto.

 

Document download
Ebara DW VOX

Ebara DW VOX

The submersible sump pumps are manufactured in 304 stainless steel, with a double mechanical seal. They have a vortex impeller, suitable for dirty water applications with some solids and/or fibres. They can be used are used for pumping of drainage and industrial waste water, 0.55 to 1.1 kW (1ph) Manual or Auto and 0.55 to 1.5 kW (3ph) Manual only

Document download
Grundfos SE

Grundfos SE

The Grundfos SEV and SE1 pumps are designed for handling wastewater, process water and unscreened raw sewage. These technologically very advanced series of pumps are available with efficient single-channel or Super Vortex impellers allowing for free passage of solids up to 100 mm in size. This greatly reduces the risk of clogging, and ensures maximum up-time and low operating costs. The SEV and SE1 pumps can be permanently installed by means of an auto-coupling system or with a fixed pipe connection, submerged or dry, without separate motor cooling arrangements. The pumps are also suitable for free-standing installation, or as portable utility pumps.

 

Document download
Grundfos SEG

Grundfos SEG

Grundfos SEG pumps are designed for pumping:

  • Sewage
  • Wastewater
  • Wastewater with high content of fibrous material

Grundfos SEG series are a submersible pump with a horizontal discharge port. They are specifically designed for the pressurised pumping of sewage and wastewater containing destructible solids. The pumps are equipped with a cutter system which cuts destructible solids into small pieces so that they can be led away through pipes of a relatively small diameter. The compact design makes these pumps suitable for both free-standing and auto-coupling guide rail installation.

SEG Auto Adapt series have inbuilt level switches and communication between pumps. This means they can be installed without the need for complex switchboards and floats. No level switches or motor protection required.

Features and benefits

  • Integrated cutting system (APG)
  • Dry or submerged installation
  • Installation on auto coupling
  • Sensors in windings
Document download
Grundfos UNILIFT AP

Grundfos UNILIFT AP

Grundfos Unilift AP series of stainless steel submersible drainage, effluent and domestic sewage pumps. Medium duty, free standing pumps, either manual and auto operation.  

 

Document download
KSB Amarex

KSB Amarex

KSB Amarex N pump range is a vertical, single-stage submersible motor pump, for wet installation, stationary and transportable design. Amarex N pumps are floodable, single-stage, single-entry close-coupled pump sets which are not self-priming, handling of all types of waste water, especially untreated sewage containing long fibres and solid substances, fluids containing gas/air, as well as raw, activated and digested sludge

Document download
MST Submersible Slurry Pumps SS Series

MST Submersible Slurry Pumps SS Series

The MST range of Submersible SS Slurry Pumps designed for pumping abrasive and high-density slurries in mining, heavy industry, civil construction and municipal applications. These pumps were branded as “Southern Cross” in the Australian market until 2017.

They feature a 27% chrome white iron impeller, integral agitator, volute and replaceable back plate. They use a Low speed electro submersible motor, which provides reliable continuous operation.

TECHNICAL DATA

Pump Outlet: 80mm to 400mm

Capacity: 6.5 – 670 litres per second

Head: up to 64m

Maximum solid size: 10 - 60 mm

Speed: 980 - 1480 RPM

Motor size: 7.5 – 315kW

Document download
Regent Column Sump Pump

Regent Column Sump Pump

Regent Column Sump Pumps are long-column versions of the range of end suction centrifugal models. Any model from the Minorflow, Superflow, Majorflow or Dinflow range may be transformed into a column pump, to provide exactly the performance required. Casings and Impellers can be supplied in combinations of cast iron, bronze, zinc-free bronze and stainless steel. TEFC motors are standard; others such as flameproof and immersion-resistant may be fitted. Column length made to order.

 

Document download
Ultraflow Packaged Pump Stations

Ultraflow Packaged Pump Stations

Ultraflow pumping stations generally include a reinforced fibreglass pumpwell, with 1 to 4 submersible pumps, cutter, grinder, vortex or drainage, all internal plumbing, valves, and an electrical control panel with level switches.  Extras can include a pump guide rail system, and remote system monitoring. Ultraflow pumpwells are available in many different sizes, between 450mm – 3200mm in diameter and up to 10.0 metres deep, depending on the design parameters.

Features

Ultraflow pump stations are supplied with all internal piping and valves installed and ready for use.  If guide rail systems are used, they are also mounted in the pump station which mostly eliminates the need for Confined Space Entry.   All this makes Ultraflow pump stations quick and simple to install. Ultraflow pumps stations can be configured to almost any specifications.

Ultraflow Submersible Drainage Pumps

Ultraflow Submersible Drainage Pumps

The Ultraflow Drainage submersible pump range feature a semi open Cast Iron impeller and motor sizes from 0.4kw to 2.2kw, in 240 or 415 volt, with or without auto float switches. The Ultraflow Drainage range are suitable for:

Site Dewatering

Basement and sump drainage

Fountains and water features

Horticulture

Aquaculture

Grey water transfer

Water transfer

Stormwater

Document download
Ultraflow Submersible Heavy Duty Drainage

Ultraflow Submersible Heavy Duty Drainage

The Ultraflow Heavy Duty Drainage submersible sump pump range feature a High Chrome enclosed impeller and wear ring, with motor sizes from 2.2kw to 7.5kw, 415-volt. The Ultraflow Heavy Duty Drainage range of submersible pumps are suitable for:

Site Dewatering

Construction Sites

Quarries

Commercial wastewater treatment plants

Civil engineering projects

Flooded underground carparks

Document download
Ultraflow Submersible High Flow Drainage Pumps

Ultraflow Submersible High Flow Drainage Pumps

The Ultraflow Large Drainage submersible pump range feature a semi open Cast Iron impeller and motor sizes from 3.7kw to 45kw, 415-volt. The Ultraflow Large Drainage range are suitable for:

Site Dewatering

Basement and sump drainage

Fountains and water features

Horticulture

Aquaculture

Grey water transfer

Water transfer

Stormwater

Document download
Ultraflow Submersible Sewage Cutter pump

Ultraflow Submersible Sewage Cutter pump

The Ultraflow range of submersible Sewage Cutter pumps feature a single channel, semi open, hardened cast iron impeller, with tungsten carbide cutter tip. These submersible pumps come with motor sizes from 0.75kW to 3.70kw, in 240 or 415 volt, with or without inbuilt float switches. These pumps are suitable for;

Raw sewage transfer

Light sludges and slurries

Trade waste disposal

Grey water and septic transfers

Pumping liquids with soft solids

Document download
Ultraflow Submersible Wastewater Vortex Pumps

Ultraflow Submersible Wastewater Vortex Pumps

The Ultraflow Wastewater Vortex range of submersible pumps feature a cast iron Vortex style impeller, suitable for transferring larger solids. These submersible pumps come with motor sizes from 0.75kW to 11.0kw, in 240 or 415 volt, up to 2.2kW can be supplied with inbuilt float switches. These pumps are suitable for;

Raw sewage transfer

Basement and sump drainage

Light sludges and slurries

Trade waste disposal

Grey water & septic transfers

Pumping liquids with soft solids

Stormwater

Document download
© 2021 Industrial Pumping Pty Ltd