Products by Type: End Suction

Davey ISO

Davey ISO

ISO end suction pumps have been designed to international standard ISO2858, so that they are dimensionally and operationally interchangeable with other similar pumps conforming to this standard. They feature Caste Iron casing, S/S impellers and replaceable wear rings. They are used in a wide range of applications such as irrigation, municipal and industrial water supplies, commercial pools etc.

Document download
Ebara 3LS2

Ebara 3LS2

The 3LS series are a 2-Pole speed close coupled stainless steel pump, featuring one piece, plasma stamped volute casing. The smooth stamped stainless steel surfaces result in superior quality and high efficiency.

The back pull-out construction permits the disassembly and overhaul of the impeller, shaft and bearings, without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.

Document download
Ebara 3LS4

Ebara 3LS4

The 3LS4 series are a 4-Pole speed close coupled stainless steel pump, featuring one piece, plasma stamped volute casing. The smooth stamped stainless steel surfaces result in superior quality and high efficiency.

The back pull-out construction permits the disassembly and overhaul of the impeller, shaft and bearings, without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.

Document download
Ebara 3LS4-65/80

Ebara 3LS4-65/80

The 3LS(4)-65/80 series are are full caste 316 Stainless Steel pump ends.  They have as standard Silicon vs Silicon Viton mechanical seals. The back pull-out construction permits the disassembly and overhaul of the impeller, shaft and bearings, without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.

 

Document download
Franklin Product Range

Franklin Product Range

Open the PDF to view the full Franklin Electric pump range.

Document download
Grundfos NB

Grundfos NB

Grundfos NB/NBG pumps are all non-self-priming, single-stage, centrifugal volute pumps with axial end suction port, radial discharge port and horizontal shaft. The NB/NBG range consists of close-coupled pumps ISO dimensions, fixed or variable speed.

Document download
KSB Etanorm

KSB Etanorm

KSB Etanorm pump range is a horizontal, long-coupled, single-stage volute casing pump in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Used predominantly in building services.

 

Document download
Regent DIN Vortex

Regent DIN Vortex

The Vortex range is the DINflow close coupled pump, fitted with a recessed impeller. As the vortex recessed impeller is located outside the flow path, it moves the liquid in a vortex action, during which less than 10% of the liquid enters the impeller vanes. This action, and the pump’s internal clearances, allows the passage of solids and fibrous matter.

 

Document download
Regent DINbloc

Regent DINbloc

The Regent Dinbloc series is the close coupled motor pump version of the Dinflow DIN standard 24255, single stage, end suction centrifugal pump. The Dinbloc uses standard Dinflow pump components, and specially designed support frame and stub shaft to couple the pump directly to a foot-and-flange, metric frame electric motor. Casings and Impellers can be configured in combinations of cast iron, bronze, zinc-free bronze and stainless steel. TEFC motors are standard, however others such as flameproof and immersion-resistant may be fitted.

 

Document download
Regent DINflow

Regent DINflow

The Regent Dinflow is a bare shaft, DIN standard 24255, single stage, end suction centrifugal pump, with vertical discharge. The Dinflow volute casing is fitted with replaceable wear rings and is back pull out. The pump can be configured in a variety of sealing options, from packed gland through a range of mechanical seals, and the materials of construction from Caste Iron, Bronze, Zinc Free Bronze and Stainless Steel.

 

Document download
Regent ISO Flow

Regent ISO Flow

A bare shaft single stage end suction centrifugal pump, ISO Standard thus dimensionally interchangeable with all pumps conforming to this standard. It also features Back Pull-Out of entire rotating element and easy impeller removal due to taper mounting.

 

Document download
Regent ISObloc

Regent ISObloc

A close coupled version of the Regent ISO flow range. ISO bloc pumps are to the ISO standard, and use standard “off–the–shelf “ TEFC foot and flanged electric motors. The ISOBloc range come in a wide variety of construction materials, pump discharge positions and operating range.

 

Document download
Regent Majorflow

Regent Majorflow

Regent Majorflow pumps are a close coupled, end suction, centrifugal motor pump. They have a radial discharge, allowing the casing to be mounted in eight alternative discharge positions. They are standard with a mechanical seal, pump casing & back plate construction close grained cast iron. Options available are bronze, zinc free bronze or stainless steel.

 

Document download
Southern Cross ISO PRO

Southern Cross ISO PRO

APPLICATIONS

Designed for heavy duty industrial use, including belt drive applications, for general water transfer in processing plants, mines, construction sites and irrigation.

FEATURES

  • Heavy duty oil lubricated taper roller bearings
  • Australian designed and manufactured
  • Heads to 160 metres
  • Up to 250 litres per second discharge
  • Manufactured to ISO 5199 Standard
  • Heavy duty design type 316 shaft
  • High strength cast iron bearing housing
  • Mechanical seals fitted as standard with single on-shaft mechanical seal
  • 1600kPa pressure rating
  • Taper mounted impeller for positive drive and easy removal
  • Replaceable stainless steel or zinc free bronze wear rings
  • Reusable ‘O’ ring body seals in Viton as standard and Teflon or EPDM as options
  • AS2129 Flanges
  • Standard tappings —Volute drain plug, suction flange tapping for suction gauge and discharge flange tapping for pressure gauge

OPTIONAL WET END MATERIAL OPTIONS

  • Cast Iron
  • Stainless Steel
  • Zinc Free Bronze
  • SG Iron

 

Document download
Southern Cross ISO Sovereign

Southern Cross ISO Sovereign

APPLICATIONS

Designed for efficient and reliable general purpose water transfer in industry, building services and irrigation.

FEATURES

  • Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance.
  • Australian designed and manufactured
  • 32 to 200mm discharge
  • Up to 250 litres per second discharge
  • Heads to 160 metres.
  • Taper mounted and keyed impeller for easy removal from shaft
  • Heavy duty shaft with large capacity impeller end bearing for safe operation at high speed
  • Hydraulically and dynamically balanced impellers
  • Type 431 stainless steel shaft
  • Rugged cast iron volute with integral suction and discharge flanges and mounting feet
  • Pressure rated to 1600kPa (160 metres head)
  • Cast iron impeller and backplate
  • Stainless steel impeller nut
  • Maximum pumped liquid temperature for “ISO Sovereign” Pumps is 80°C using standard seals
  • Lip type shaft seals to protect bearings
  • Single mechanical seal
Document download
Southern Cross ISO Starline Motorpump

Southern Cross ISO Starline Motorpump

APPLICATIONS

Designed for efficient and reliable general-purpose water transfer in industry, building services and irrigation.

FEATURES

  • Space saving design
  • Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance
  • Australian designed and manufactured
  • Up to 250 litres per second discharge
  • ISO 9001 quality assured
  • 32 to 200mm discharge
  • Heads to 160 metres
  • se of standard off-the-shelf foot and flanged electric motors
  • Taper mounted and keyed impeller for easy removal from shaft
  • Heavy duty stainless steel shaft extensions for safe operation at high speed
  • Type 316 stainless steel shaft extension
  • S.G. cast iron motor shaft clamp
  • TEFC IP55 motor; rugged cast iron volute with integral suction and discharge flanges
  • Pressure rate 1600kPa (160 metre head)
  • Cast iron impeller and backplate; stainless steel impeller nut
  • Rigid cast iron bell housing connects motor and pump housing
  • Single mechanical seal.
  • Maximum pumped liquid temperature for ‘Star-Line’ Motorpumps is 100°C using standard seals. 
  • Liquids up to 140°C can be handled using special seals

 

Document download
Stalker APC

Stalker APC

The Stalker Pumps APC Range are designed, engineered & manufactured in Perth, Western Australia. APC Units are customised to suit specific project needs, with in-house casting of all metals means competitive pricing, short lead times and quality control.

Applications & Options:

  • Stalker offer an experienced drafting, fabrication & installation team for complete customised pumping solutions, configured to suit a wide variety of applications including clean water, sea water, raw water, process water, waste water, sewage and hazardous fluids, as well as corrosive liquids.
  • Base frame mounted and/or heavy duty trailer mounted assemblies available.
  • Engine: Cummins, Caterpillar, Detroit – customer specified units available
  • Fuel Tank: Bunded fuel tank.
  • Control Panel: Engine manufacturer standard panel, or additionally client specified and/ or telemetry can be fitted.
  • Fuel Filling standard or optional: Hydrau-Flo fuelling system.
  • Wiring: Mine spec or MDG15 available.
  • Pipework: Suction booms, discharge pipework – to customers specifications.
  • Various material options

Operating Limits: (Model Dependant, Refer to Individual Model Curves)

Max Flow 500 L/Sec

Max Pressure 200 M/Hd

Document download
Stalker APR

Stalker APR

Stalker Pumps APR Pumps are self-priming eliminating the need to prime the pump before operation as with centrifugal pumps. The proven mechanical design provides excellent reliability and easy service maintenance. The Primary design application is for dewatering.

Applications & Options:

  • Major components manufactured from heavy section castings in materials to suit application.
  • Highly durable rotating element designed using AS2837-316 stainless steel for shafts, sealed for life, re-grease able or oil fed long life bearings, DIN 24960 rubber bellows type Mechanical seals with a variety of seat face options, both open and closed impeller designs available.
  • Fasteners – 8.8 grade high tensile zinc coated and stainless steel 316 grade.
  • Direct coupled units fitted with heavy duty pin bush or flexible tyre coupling fully enclosed in an anti-scatter guard.
  • Pulley drive option features a heavy duty double row bearing fitted for overhung loading.
  • Mounting options – trailer mounted, heavy duty base frames in materials to AS3679 – open direct mount, open skid type or skid type with fuel tank fitted.
  • Engine configurations in both petrol and diesel models with performance and capacity to suit to application from reputable OEM suppliers: – Caterpillar, Cummins, Perkins, Honda, Yanmar and Deutz.
  • Various Material Options Available.

Operating Limits: (Model Dependant, Refer to Individual Model Curves)

Max Flow 350 L/Sec

Max Pressure 90M/Hd

Document download
Stalker Compact

Stalker Compact

Stalker Pumps Compact Series are designed using heavy material sections for strength and durability. This range is especially suited for agricultural, domestic and industrial applications.

Features:

  • Casing/Impeller/Intermediate Cover/ Motor End Coupling – Cast Iron to AS1830.
  • Direct shaft mounted Impeller.
  • Fasteners – Zn Coated 4.6 – 8.8 grade.
  • All Gaskets and Seals utilised on assembly are manufactured from proven long life materials.
  • The Ball Bearings fitted to the rotating element are long life heavy duty which can be supplied in sealed for life or grease lubricated assemblies.
  • Mechanical seals are to DIN 24960 and are rubber bellows type with hard faced seats.
  • Electric Motors are fitted to suit Tropical conditions.

Operating Limits: (Model Dependant, Refer to Individual Model Curves)

Max Flow 14 L/Sec

Max Pressure 55M/Hd

Document download
Stalker ISO

Stalker ISO

The Stalker ISO are manufactured in Western Australia to the highest quality, employing the best engineering practices available. Their ISO range are designed and manufactured to internationally recognised ISO 2858 standard.

Applications & Options:

  • Available as standard direct coupled units suitable for direct coupling or pulley driven by electric motors, petrol or diesel engines and hydraulic motors.
  • Manufactured for close coupling to electric motors.
  • Suitable for pumping clean water, sea water, raw water, process water, waste water, sewage and hazardous as well as corrosive liquids.
  • Supplied as stand-alone units or coupled to the drive of your choice.
  • Mounted base frame and/or Heavy duty Trailer mounted assemblies available.
  • Can be configured to suit a wide variety of application conditions which are not catered for by other manufacturers.
  • Consumable material options available for high tensile fasteners, high grade material O-rings, oil seals and mechanical seals.
  • Various material options.

Operating Limits: (Model Dependant, Refer to Individual Model Curves)

Heads: up to 160 metres

Capacities: up to 250 litres per second

Document download
Stalker SHD

Stalker SHD

The SHD Series is the Stalker Heavy Duty Pump Range. Their primary design application is mine dewatering. The Heavy duty build options available on all 400 and 500mm impeller series ISO class pumps.

Applications & Options:

  • Suction and Discharge flanges – heavy duty with hole patterns to ANSI Class 150 and 300.
  • Major cast components manufactured from heavy section abrasion resistant white iron complying with AS2027. dditional components cast from heavy section Spheroidal Graphite (SG) iron complying with AS1831 400 Mpa tensile. Impeller material – H3B (AS2074) heat treated stainless steel.
  • Shaft material – alloy steel to AS1444-4140 max. 1100 Mpa UTS with O-ring sealed wear sleeve fitted (material AS2837 – 316 stainless steel).
  • Mechanical Seal Assembly Cartridge type -heavy duty to suit application.
  • Gaskets/Seals/O-rings – insertion rubber/nitrile (viton fluroelastomer option).
  • Fasteners – 8.8 grade high tensile Zinc coated and 316 stainless steel.
  • Rotating Element Bearings – front angular contact 7316 series & heavy duty ball 6316 (C3) series bearing.
  • Rear – heavy duty 6316 (C3) series ball bearing.
  • Grease feed with purge flingers.
  • Optional builds include compressor assisted pump pre-prime units, base and trailer mounted units.
  • Various Material Options Available

Operating Limits:  (Model Dependant, Refer to Individual Model Curves)

Max Flow: 500 L/sec

Max Pressure: 250 M/Hd

Document download
© 2024 Industrial Pumping Pty Ltd